Is your Netgear WiFi range extender simply refusing to connect to the router? If the answer to the question is yes, then know that you’ve come to the right place looking for a solution. Here, you’ll be provided with various troubleshooting tips through which you can easily resolve the issue at hand. So, with no further discussion, let’s ge down to it, shall we?
Troubleshooting: Netgear Extender Not Connecting To The WiFi Router
Tip 1. Check the Power Supply
Before jumping onto the advanced troubleshooting steps, make sure that consider the points mentioned below:
- Your Netgear WiFi extender should receive an adequate power-supply.
- Check whether all the LED lights on your device are stable or not.
- The extender and your home router should be placed close to each other.
- Ensure that the power cable and wall socket are not damaged.
If after considering these steps, if your extender still isn’t connecting to the WiFi router, then it is recommended that you scroll down, and go through the advanced tips.
Tip 2. Verify the Cable Connections
There is a possibility that the reason why your extender isn’t connecting to the router is because of an improper connection between your WiFi devices. To troubleshoot this issue, the points outlined below might be of some to you:
- Ensure that you Netgear extender is well connected to Netgear_ext (SSID).
- Connect the extender and your home router with the help of an Ethernet cable.
- Do not make use of a damaged or worn out cable to connect your devices.
- Also, you can try getting in touch with your Internet Service Provider (ISP).
If the Netgear range extender still not connecting to the WiFi router? Well, looks the issue is much bigger than you thought. But fret not, we still have the next two tips to assist you.
Tip 3. Relocate the Netgear Extender
Are you sure that you placed your WiFi extender at its ideal location while performing new extender setup? No? Well, then it’s high time that you do. Placement of your device plays a major role when it comes to its proper functioning.
To take care of this teeny-tiny issue, here are some points that you should follow:
- Pick the center-most location in your house to place the Netgear extender.
- Do not place your WiFi device near corners or thick concrete walls.
- Keep electronic devices and transmitting appliances away from your device.
- Keep metal objects like metal doors and aluminium foil at a fair distance too.
- Fish tanks and mirrors should also be far away from your WiFi extender.
All these devices create interference in the WiFi signals of your Netgear extender. Thus, it’s best to keep your device away from such objects and devices for its own safety.
Tip 4. Power-Cycle Your Device
Another major reason why your extender isn’t connecting to your home router is because of a technical glitch. To avoid this technical glitch from completely damaging your device, it is important that you power-cycle it.
Here are the step-by-step guidelines to power-cycle your Netgear WiFi range extender:
- Unplug your Netgear extender from the wall socket.
- Wait for a couple of minutes before proceeding.
- Then, plug the power cable back into the wall socket.
- Press the Power button on your device.
- Wait for the power LED light to turn solid green.
Once you power cycle your Netgear WiFi range extender, access the www.mywifiext.net web page and see whether the issue has been fixed or not. If not, then don’t hesitate to get in touch with our team of experts immediately. Simply drop your queries in the comments section below. We’ll revert back to you in no time.